In-Ovation R has been recognized as an industry leader for over a decade. Thousands of clinicians worldwide have trusted In-Ovation to treat their patients. The precision and quality built into these brackets offers repeatable success, practice efficiencies and beautiful results every time. See how far In-Ovation R can take you, your patients and your practice.
In-Ovation R provides you with the ability to start and effectively finish your treatment with one, simple system. Using the technique of your choice, In-Ovation R enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation R’s unique Interactive technology means you can choose the degree of engagement between the bracket and wire. It can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing.
|  |  | ||
| Passive Phase | Expressive Phase | Active Phase | ||
| Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment. | Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. | Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque. |
| Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed. |
Practice Advantages
Not all self-ligating brackets are created equal. In-Ovation R brackets were created to optimize the treatment process with precision engineering and true straight wire design. The In-Ovation orthodontic systems are the result of a keen understanding of human physiology and orthodontic engineering.
The compound contoured base of the In-Ovation R bracket is designed to provide a precise anatomical fit across the enamel surface of the tooth. The smooth swept tie-wings are engineered to minimize occlusal interference in order to increase patient comfort. In addition, the chamfered archwire slot is designed to reduce chair time by facilitating wire engagement and reducing the chance of archwire binding or crimping. This dedication to quality and attention to detail is infused into every product that carries the In-Ovation name.
Patient Advantages
Today more than ever, patients are doing their part to better understand the options available to them. Savvy practices have come to recognize this as an opportunity, enabling you to offer the benefits of self-ligation as an adjunct to your talent, technique and reputation.
In providing a self-ligating option, you’ll be able to offer your patients less chair time, fewer appointments and a cleaner, more esthetic appearance. In doing so, you’ll be able to create a perceived (and potentially significant) point of differentiation between your practice and the other competing practices in the area.
True Twin Design – Occlusal and gingival twin tie-wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increase your inter-bracket distance.
Spring Clip – The self-ligating clip extends fully through the vertical channel in the bracket body, enhancing the structural integrity of the clip.
Base Design – The exclusive patented Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription.An 80 gauge single mesh, compound contoured base provides a precise anatomical fit.
Full Slot Slip Coverage – The In-Ovation R clip provides full coverage across the entire slot for superior rotational control. This allows the clip to interact with the wire both
on the mesial and distal, as needed, without the need for auxiliaries.
Straight Wire Technology In-Ovation is a completely adjusted true straight wire appliance system that positions teeth at all four dimensions: in/out, angulations, torque, and overcorrection. With this completely adjusted four dimensional appliance system you will need no offset bends in the archwires to obtain an optimal finish in most cases (if the brackets are optimally positioned on teeth).
In order to be considered a completely four-dimensional appliance, the bracket must contain:
Easy Open Clip – The clip opens easily when pressure is applied occlusally to the v-notched clip at the gingival side of the bracket, using the engage R or similar instrument. The clip can be closed with an instrument or simple finger pressure on the incisal curve.
Triple Chamfered Slot Walls – Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping.
Vertical Scribe Line – A scribe line on the bracket face aids positioning by providing a convenient reference for orienting the center line of the bracket with the facial axis of the clinical crown (FACC).
Smooth Swept Tie-Wings –Help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.
The In-Ovation C self-ligating bracket is made from ceramic material that compares to the strength and performance of metal. A highly esthetic self-ligating bracket made from a special ceramic material with a rhodium processed clip for enhanced esthetics. The natural color of In-Ovation C makes the bracket a perfect fit for patients concerned about esthetics, while delivering functionality comparable to metal brackets.
In-Ovation C provides you with the ability to start and effectively finish your treatment in one, simple system. Using the technique of your choice, In-Ovation C enables you to maintain the precise degree of control that you need for each phase of your patient’s treatment. In-Ovation C’s revolutionary Interactive™ technology means you can choose the degree of engagement between the bracket and wire. In-Ovation C can be passive for leveling and aligning, expressive where control is realized and free-sliding is maintained, or active for controlled, optimal finishing. The choice is yours – a benefit not found in “passive only” brackets.
Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment.
Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed.
Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.
Practice Advantages
In-Ovation C provides a great way to optimize your practice and expand treatment options. Studies consistently show that self-ligating brackets significantly lower frictional forces; offer faster, easier archwire changes; increase appointment intervals; and shorten patient treatment time.
In-Ovation C is easy for doctors and staff to use. Designed for reliable performance, the bracket’s 100% mechanical lock base ensures reliable bonding, debonding and the ability to rebond. A specially designed interactive, Coballoy spring clip provides excellent
Patient Advantages
Transluscent Ceramic Construction
In-Ovation C brackets are manufactured from a high-tech ceramic that combines excellent translucency with strength and performance similar to that of steel.
Reliable Mechanical Bonding
In-Ovation C employs a proprietary process to form strong, undercut bonding nubs on the bottom of the bracket base. These provide excellent anchoring points for the adhesive, resulting in a bond that is 100% mechanical and debonds easily after treatment.
Straight Wire Technology
A true straight wire appliance is one in which all the brackets have been designed to guide teeth into their desired positions with a preformed wire.
In-Ovation is a true straight wire appliance that features:
True Twin Design
Occlusal and gingival twin tie wings offer an optimal mesial, distal span for achieving superior rotation control. The elimination of the elastomeric ligatures increases your inter-bracket distance.
Spring Clip
The self-ligating clip extends fully through a vertical channel in the bracket body, enhancing the structural integrity of the clip. A unique rhodium treatment process provides a low-sheen surface for reduced visibility and enhanced aesthetics.
Easy Opening and Closing
The clip opens easily when pressure is applied occlusally to the gingival sphere using the Engage-C. This is the primary method for opening and closing the clip is the gingival sphere.
If unable to access the gingival sphere you can also utilize the Opin notch on the facial surface of the clip applying gentle pressure occulsally with amini scaler.
The clip can be closed with aninstrument or simple finger pressure on the incisal curve.
Triple Chamfered Slot Walls
Slot walls are beveled outward, facilitating wire engagement and reducing the chance of the archwire binding or crimping.
Disto–Gingival Dimple
A color-code on the disto-gingival tie wing provides immediate identification of the tooth for which the bracket is intended. A matching colored removable site gauge is also in the slot for position orientation.
Smooth Swept Tie Wings
Smooth, swept tie wings help to reduce occlusal interference while increasing patient comfort. Adequate undercuts allow easy anchoring for elastic chains or the fastening of color ties at the patient’s request.
In-Ovation L turns traditional treatment outside in. Lingual mounting In-Ovation L brackets offer an all-but-unseen treatment, while simplifying the difficult chore of archwire changes thanks to the easy-open, easy-close clips.
By leveraging the properties of self-ligation there are new and profound reasons to incorporate lingual treatment as an esthetic alternative to traditional braces or clear aligners. In-Ovation L takes advantages of the In-Ovation self-ligating line of brackets success to solve one of the biggest problems doctors have traditionally encountered with lingual systems — archwire ligation. The In-Ovation L clip opens and closes easily and quickly to make archwire ligation literally a “snap.
Dentsply Sirona has translated the proven clinical benefits of In-Ovation into a lingual design. Only an interactive bracket provides full functionality throughout the course of treatment. This allows you to enjoy the early benefits of a freesliding, passive design and the precise control of an active one in the later stages of treatment. The In-Ovation L self-ligating bracket gives you a complete range of control options... simply by changing the archwire.
Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment.
Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed.
Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.
Practice Advantages
More and more, adults want to experience the benefits of a perfect smile, without the obvious appearance of metal or ceramic brackets. As orthodontists, you may also have begun to see an increase in the number of patients in search of re-treatment due to inconsistent or non-existent retention after the completion of clear aligner therapy or traditional braces. For patients who want fast results and an invisible solution, traditional braces are obviously not an option. Clear aligners require compliance and lab fees and may require a longer treatment time. Now you have a completely undetectable solution to offer your patients with In-Ovation® L.
Patient Advantages
The In-Ovation mini bracket is the smallest self-ligating twin bracket we’ve ever produced. Designed, developed and manufactured using the latest in micro-engineering technology, In-Ovation mini raises the bar on low-profile performance. From the innovative clip design to the patented Interactive™ technology that offers unmatched precision and control—In-Ovation mini gives you the power to finish every case with the utmost precision. And with a smaller than other competitive interactive brackets your patients will love the esthetics and comfort level. Innovation means doing more with less, and no bracket does more for you, your practice, and your patients, than the In-Ovation mini. It’s the bracket you’ve always wanted, from the company you’ve always trusted.
Programmed for Versatility
In-Ovation mini is proud to offer you the versatility of both interactive and passive design in a single unified system. It puts unprecedented treatment options in your hands. Passive cuspids and bicuspids are available in the posterior for lower friction sliding mechanics.
Passive Phase – Small, round wires slide freely, initiating the tooth movement process as the archwire gently levels the teeth and coaxes them into alignment.
Expressive Phase – Square or rectangular wires are gently seated into the base of the slot without contacting the clip. Programming is expressed, rotations are corrected and space closures are completed.
Active Phase – Rectangular archwires extend beyond the slot to fully engage the clip, providing the active control necessary for functional finishing, uprighting of the roots and adjusting the torque.
Interactive Spring Clip
Presents the utmost in control throughout treatment.
True Twin Design
Four tie-wings with adequate undercuts and integrated body channel allow easy anchoring of elastic chains or use of color ties at the patient’s request.
Base Design
An 80 gauge single mesh, compound contoured base provides a precise anatomical fit. Exclusive Patented Standard Palmer Notation laser etched into the mesh facilitates bracket management with a ready reference of the quadrant, tooth and prescription.
Full Slot Clip Coverage
For rotational control that limits the need for auxiliaries.
Facial Scribe Line
Added to the In-Ovation mini for simplified placement.
True Straight Wire Design
A true straight wire appliance is one in which all the brackets have been designed to guide the teeth into their ideal position with a preformed wire. In-Ovation mini is a true straight wire appliance that features a compound contour base, torque in the base, programmed in-out control and level slot alignment.
Easy Open Clip
Affords a frustration-free procedure.
Disto-Gingival Dimple
A color code on the disto-gingival tie-wing provides immediate identification of the tooth for which the bracket was designed.
Triple Chamfered Slot Walls
Ease of engagement, reducing the chance of the archwire binding or crimping.
Smooth Swept Tie Wings
Helps reduce occlusal interference while increasing patient comfort.
No•Trace System is the all-but-undetectable lingual treatment that work behind the scenes for patients requiring 6mm or less of correction. No•Trace System is designed to treat minor anterior alignment cases in as little as 12-24 weeks. Bonding No•Trace braces is easy and efficient with self-ligating brackets and optional indirect bonding. And because there's no action required by the patient, compliance is nearly effortless. When it comes to minor tooth movement, offer your patients the option of No•Trace System, the low-profile brace without a trace.
Practice Advantages
No•Trace System utilizes small, easy-to-bond, self-ligating, lingual brackets that can be applied to the six upper and six lower anterior teeth including wire placement, in just 30 minutes. Virtually invisible, No•Trace braces offers easy, predictable treatment so doctors and staff may treat patients quickly and effectively - without visible braces or removable trays to manage. For most cases, treatment can be completed in as little as 12 to 24 weeks.
The No•Trace System self-ligating, lingual brackets can be placed directly or indirectly. To place directly, the brackets are set just below the incisal edge, making placement as simple as placing a lingual retainer. Indirect placement is also available and allows the system to be positioned and bonded quickly.
Patient Advantages
In most cases, you will only need to place one or two wires to complete the case.
No•Trace System is an emerging segment within the orthodontic field. It's an innovative way to address common problems such as crowding, gaps and bite discrepancies. Best of all, each No•Trace System case costs significantly less to administer than other minor treatment alternatives offered today.
With two placement options available to you, placing No•Trace brackets and archwires, is a simple process. Remarkably similar to a typical labial procedure it typically requires about 30 minutes of chair time to complete.
Direct placement of No•Trace brackets requires 3 easy steps. First, prep the teeth as you would for normal labial bonding. Second, apply adhesive and position brackets 1-2mm from the incisal edge and cure. Once the brackets are completely cured, the archwire can be immediately inserted in to the self-ligating No•Trace brackets, using thumb pressure to close the clip and secure the wire in the same manner as labial self-ligating brackets.
No•Trace System Indirect Bonding service is easy to use, and ensures complete confidence that each bracket will be in its ideal position. Once you submit your patient's impression, our lab technicians create a cast model and place the brackets on the model per your exact prescription. Hi-res images are securely posted on-line for the clinician to review and approve. Once approved, the No•Trace System indirect transfer trays are fabricated from a specially formulated polymer that demonstrates high flexibility while maintaining necessary stability
Custom bases are created that conform to the anatomy of each tooth. As a result bonding the bracket to the enamel can be accomplished with an extremely thin coating of the uniquely formulated adhesive provided that light cures easily and more efficiently than conventional adhesives. Once complete a No•Trace System Patient Kit is shipped to you to complete your case.
NoTrace is appropriate for patients with the following:
