CAD/CAM Materials

for the Dental Practice

Glass ceramics

CEREC Tessera

Advanced Lithium Disilicate (ALD)

CEREC Tessera CAD/CAM blocks provide outstanding esthetics for a truly tooth-like restoration for single-unit full contour crowns, inlays, onlays and veneers. Up to 32% higher biaxial strength for restoration longevity and up to 44% faster total processing time compared to the usual standard for greater patient satisfaction and a more profitable procedure.1

Learn more

Celtra Duo

Zirconia-reinforced Lithium Silicate (ZLS)

With crystallites four to eight times smaller than lithium disilicate blocks, Celtra Duo (ZLS) possesses an ultra-fine microstructure that combines high flexural strength with a high glass content, resulting in an impressive strength and beauty profile1. Celtra Duo can be processed either by mill and fire or mill and polish.

Learn more

Zirconia oxide ceramics

CEREC MTL Zirconia

Multi Transitional Layer Zirconia

CEREC MTL Zirconia is a high-strength, pre-dyed multi-layer zirconium dioxide block for CEREC CAD-CAM systems, availabel in 7 VITA®2 classical shades. High esthetics caused by the seamless color gradient, strength greater than 850 MPa3 and a fast zirconia worklflow when using the CEREC Primemill & CEREC SpeedFire.

Learn more

CEREC Zirconia+

Translucent Pre-Dyed Zirconium Oxide Blocks

Improved esthetics, constant durability, proven safety. CEREC Zirconia+ is a pre-dyed high strength (>1000MPa1) translucent zirconium dioxide which is available in 10 classic VITA®2 shades and does not require any further shading with a liquid.

Feldspar ceramics

CEREC Blocs C

Enamel-like-properties for inlays, onlays, veneers and fully anatomical crowns

CEREC Blocs C are optimized for use for inlays, partial crowns, and veneers. CEREC Blocs C provide a very good color integration into the residual tooth tissue of restorations and also have a clinical survival rate of 90% after 10 years.4

CEREC Blocs C PC

For natural-looking anterior and posterior crowns

CEREC Blocs C PC are optimized for the use in crowns; with their three different layers based on varying degrees of color saturation (chroma) they can be optimally adapted to characteristic color gradients in restorations with respect to translucency and intensity. And all of this in VITA®2 classical colors A1C-A3,5C.

Dentsply Sirona CAD/CAM equipment for efficient, effective restorations

CEREC Primescan

Speed, simplicity, and accuracy for high-resolution digital impressions.

Learn more

CEREC Primemill

Quality, speed, convenience, and versatility for outstanding margins and surface details, whether milling glass ceramic or zirconia.

Learn more

CEREC SpeedFire

Super-fast firing, with the ability to perform even zirconia restorations at chairside.

Learn more

Dental Cements Guide

Find the right cement for your restoration

Learn more

Dentsply Sirona Permanent Cements

The Calibra family of definitive cements was designed to make it easier than ever to achieve consistent, successful results in your indirect restorations. 

Learn more

Contact us

Find out more about our Restorative products and solutions.

Contact Us
  1. Internal data on file. For more information, contact Consumables-Data-Requests@dentsplysirona.com 
  2. VITA is a registered brand of VITA Zahnfabrik GmbH
  3. 3-point bending strength
  4. Reiss B. Eighteen-Year Clinical Study in a Dental Practice in Mormann WH (ed.) State of the Art of CAD/CAM Restorations, 20 Years of CEREC, Berlin, Quintessence, 2006: 57-64