BRIDGE RESTORATIONS WITH MULTILAYER ZIRCONIUM OXIDE LIKE

CEREC MTL® Zirconia

With flexural strength of +850MPa, CEREC MTL® Zirconia is the high strength aesthetic zirconia that delivers the strength you need for the difficult posterior cases while providing natural aesthetics suitable as you move into the smile line.

Pre-Treatment of the Restoration:

  • Sandblast the restoration

Materials Flexural Strength2:

  • +850MPa 

Select achievable retention for cement recommendation:


LAB BRIDGE RESTORATIONS WITH MULTILAYER ZIRCONIUM OXIDE LIKE

Cercon® ht ML and Cercon® xt ML

Cercon® ht ML is the high translucent, hybrid zirconia multilayer for the combination of high strength and natural aesthetics. From a single crown to a 14-unit bridge. No nesting restrictions even for widespan bridges. Excellent colour matching for all 16 VITA®¹ shades and BL2.

Cercon® xt ML is an extra translucent zirconia for monolithic restorations at the highest level. Especially in the anterior region for up to 3-unit bridges up to the 2nd premolar. Available in all 16 VITA®¹ shades and BL2.

Pre-Treatment of the Restoration:

  • Sandblast the restoration

Material’s Flexural Strength2:

  • Cercon® xt ML: approx 750 MPa
  • Cercon® ht ML: 750 – 1200 MPa

Select achievable retention for cement recommendation:

BRIDGE RESTORATIONS WITH ZIRCONIUM OXIDE LIKE

CEREC® Zirconia+

CEREC® Zirconia+ is a pre-dyed high strength translucent zirconium dioxide which is available in 10 classic VITA shades and does not require any further shading with a liquid. The material is dry milled and then sintered. After the sintering process, CEREC® Zirconia+ reaches its final size. The enlarged milling ensures high precision and accuracy of fit of the final restoration. The material is available in two sizes (mono and medi). This allows you to create bridges with up to 3 units.

Pre-Treatment of the Restoration:

  • Sandblast the restoration

Materials Flexural Strength2:

  • +1000 MPa

Select achievable retention for cement recommendation:


LAB BRIDGE RESTORATIONS WITH ZIRCONIUM OXIDE LIKE

Cercon® ht, Cercon® xt or Cercon® base

Cercon® ht with True Colour Technology sets new standards for zirconia when it comes to reproducing the classic 16 VITA®¹ and bleach shades (BL and BL2). It provides the highest level of colour accuracy.

Cercon® xt  demonstrates extra high translucency in all 16 VITA®¹ and bleach shades (white and BL2) with True Colour Technology.

Cercon® base is particularly suitable for covering discoloured dies or titanium abutments and is available in 3 shades (white, medium and coloured). 

Pre-Treatment of the Restoration:

  • Sandblast the restoration

Material’s Flexural Strength2:

  • Cercon® ht: approx. 1200 MPa
  • Cercon® xt : approx. 750 MPa
  • Cercon® base: approx.1200 MPa

Select achievable retention for cement recommendation:

  1. VITA® is a registered brand of VITA Zahnfabrik GmbH
  2. 3-point flexural strength