The Enhance Flex system features flexible lamellas that adapt to every dental surface structure: anterior and posterior. So, you need only one shape for all your composite restorations. It’s that simple.
Brilliant polishing results and intuitive application deliver additional advantages. And because it is re-processable up to 10 times, you'll also save on waste and costs.
Enhance Flex Finishing & Polishing System redefines simplicity and performance in composite restorations. With its rounded flexible lamellas, it adapts seamlessly to all dental surfaces—both anterior and posterior—delivering brilliant polishing results and natural-looking esthetics. Its re-processability up to 10 times enables both cost savings and environmental responsibility, making Enhance Flex the ultimate choice for intuitive application and exceptional outcomes.
Begin the Class IV restoration by preparing the affected tooth. Ensure proper isolation and a clean working field.
Use Spectra ST A2 Cloud Shade and D1 Opaque Dentin to build the palatal shell.
Carefully sculpt the materials to form the base structure of the restoration.
Layer Spectra ST A2 Cloud Shade on the vestibular surface to mimic natural enamel.
Ensure precise placement to achieve an optimal esthetic result.
Use your sculpting tools to refine the contours of the vestibular layer.
Pay attention to anatomical details for a seamless blend with surrounding dentition.
Utilize the Enhance Flex Finishing Instrument to smooth and refine the restoration.
The recommended rotational speed for Enhance Flex is 3.000 – 8.000 RPMs. Maximum: 20.000 RPMs
Switch to the Enhance Flex Polishing Instrument to add a high-gloss finish.
This step delivers a polished, lifelike appearance for the restored tooth.
Verify the esthetics and functionality of the restoration.
The final result should exhibit seamless integration, natural translucency, and high shine.
Starting point: Class IV restoration
Final result : Spectra ST A2 Cloud shade and D1 opaque dentin shade. Finished & polished with Enhance Flex.
Surface of Spectra ST universal composite treated with 600 grit sandpaper
Surface of Spectra ST universal composite after finishing and polishing with Enhance Flex
Enhance Flex was specifically designed for the use with composites. It can be used on all kinds of composite materials.
Yes, the special geometry of Enhance Flex combined with the flexibility of the material enables the user to polish any surface with just one instrument: occlusal, labial, approximal…
We have validated the reprocessing of Enhance Flex instruments for up to 10 times!
Recommended: 3.000 – 8.000 RPMs. Maximum: 20.000 RPMs.
In general, follow the Application and Safety Precautions, which can be found on the DS website.
Follow the recommended rotational speed, and never exceed maximum speed. If possible, polish in slightly circular movements to avoid indentations. Excessive pressure should be avoided, as it may cause overheating. Sufficient water cooling is required during application (at least 50ml/min.).
The Application and Safety Precautions as well as the reprocessing instructions can be found on the DS website under our usual link: www.dentsplysirona.com/IFU
Please follow the detailed reprocessing instructions on: www.dentsplysirona.com/IFU
The Enhance Flex Finisher (1st step) has a light orange color, whereas the Polisher (2nd step) has a light grey color. This is illustrated on every box.
“More than 70% of dentists say that simplicity is the most important criteria a finishing and polishing system needs to fulfill.”3
1. Depending on market location, Spectra ST is branded as Neo Spectra® ST and Ceram.x Spectra® ST Composites.
2. Internal data on file. For more information, contact Consumables-Data-Requests@dentsplysirona.com
3. Exevia Dental Shuttle, Q4, 2016, n=301. For more information, contact Consumables-Data-Requests@dentsplysirona.com
