Prepare your Primeprint for 3D printing
Below you can find the download for the inLab CAM 22 Software required for working with Primeprint. In addition, we also provide the inLab CAD Software, inLab Apps and CEREC Software. In order to run the software you need a valid license key. In case of questions please contact your Dentsply Sirona specialist.
Important notice: Some software downloads on this page are not working as intended. If you run into any issues, please download the required software from Dentsply Sirona Global - inLab Downloads while we investigate this issue.
We appreciate your cooperation.
inLab CAM Software, inLab CAD Software & Apps
inLab CAM SW 22.3.0 3 GB
inLab CAM SW 22.1 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. *** IMPORTANT: *** inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
inLab CAD SW 22.2.0 7 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona specialist.
inLab Model 22.0.3 596 MB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona specialist.
inLab Splint 22.0.3 576 MB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona specialist.
inLab Partial Framework 22.0.2 577 MB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona specialist.
IMPORTANT
inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
Update Descriptions inLab
Update-Description inLab CAD SW 22.2.0 524 kB
This document describes changes and improvements compared to previous version inLab CAD 22.1.1
inLab CAD & CAM SW 22.0.0 Update description
This document describes changes and improvements compared to previous version inLab CAD 20.0.4 & inLab CAM 20.0.1
DS System Monitor: Connect your inLab CAM Software to DS Core
DS System Monitor 1.4.1
Connect your Connect SW and/or CEREC SW to DS Core
CEREC Software
Software installation requires a CEREC SW 5.2 license.
CEREC SW 5.2.8 5 GB
The update CEREC SW 5.2.8 is also distributed via AutoUpdate.
CEREC SW 5.2.3 4 GB
The update CEREC SW 5.2.3 is also distributed via AutoUpdate.
Update Descriptions CEREC
Update Description CEREC SW 5.2.8 47 kB
Update Description CEREC SW 5.2.8
Update Description CEREC SW 5.2.3 171 kB
Update Description CEREC SW 5.2.3
Connect Software
Here you can download the current Connect Software. This version supports Primescan AC, CEREC Primescan AC, Omnicam AC, and CEREC Omnicam AC (Windows 10). Due to different approval and registration times, not all products are immediately available in all countries.
Connect SW 5.2.7 2 GB
Connect SW 5.2.7 Software Update
Connect SW 5.2.6 2 GB
Connect SW 5.2.6 Update
Update Description Connect SW 5.2.6 165 kB
Update Description for Connect SW 5.2.6
Connect SW 5.2.3 2 GB
Connect SW 5.2.3 Update
Connect SW 5.2.2 2 GB
Connect SW 5.2.2 Update
Test cases for Primeprint Solution
inLab CAD SW, test case 1, surgical guide
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
inLab CAD SW, test cases 2, 3, 4, models and splint
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 1, surgical guide
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 2, solid model
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 3, working model
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 4, splint
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case shrinkage, 60mm, +-.05mm
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Download Centre
Visit the Download Centre to find Instructions for use, safety data sheets, eMDR documents, and more.