inLab MC XL is the fast wet milling and grinding unit with many production options for your dental laboratory. You benefit from high speed and precision and can switch from grinding to milling in just a few steps. The large selection of materials and many uses give you particularly flexible and efficient production options.
Production unit for ceramic, polymers and metal
Fine-tuned, 4-axis machining of blocks
High-speed grinding with simultaneously working, double 4-axis machining
Glass- and hybrid ceramic restorations can be produced at a previously unachievable speed with simultaneous double four-axis processing. A fully contoured Celtra Duo crown takes less than 10 minutes. This is a key success factor for potential new business models that can call for providing digital impression orders within an hour.
The inLab MC XL is characterized by precise wet machining. Especially when processing glass ceramics, the grinders used can be as small as 0.6 mm — for restorations with maximum detail in the occlusal and interproximal areas and at the preparation margin.
Material partners
inLab MC XL produces restorations perfectly in tune with the inLab CAD SW. Alternatively, you can import restorations in STL/XML format from other CAD software such as exocad®, 3Shape®, etc.*
| General | inLab MC X5 | inLab MC XL |
|---|---|---|
| Width | 590 mm | 700 mm |
| Height | 810 mm | 425 mm |
| Depth | 580 mm | 420 mm |
| Weight | 87 kg | 43 kg |
| Required compressed air pressure |
min. 7bar |
– |
| Required compressed air quality |
min. 50 l/min* |
– |
| Noise level |
<63dba |
<65dba |
| Kinematics |
||
| Axes | 5 | 4 |
| Angle of incidence for A axis |
360° |
+/- 180° |
| Angle of incidence for B axis |
+/-20°** |
15° |
| Material Types |
– |
|
| Zirconium oxide |
x | x |
| PMMA | x | x |
| Wax | x | – |
| Composite |
x | x |
| Hybrid ceramics |
x | x |
| Glass ceramics (with wet option) |
x | x |
| Lithium disilicate ceramics (with wet option) |
x | x |
| CoCr sintered |
x | x |
| Titan Preforms |
x |
– |
| Material Forms |
||
| Blocks |
40 x 19 x 12 mm |
85 x 40 x 22 mm |
| Max number of blocks per process |
6 | 1 |
| Discs (Form) |
98/98,5mm with collar |
– |
| Discs (Height) |
up to 30mm**** |
– |
| Material openness |
Yes | Not explicit |
| Tool Management |
||
| Automatic tool changing |
Yes | No |
| Max number of tools per process |
6 | 2(4) |
| Changeable tool magazine controlled in SW |
Yes | No |
| Indications (inLab CAD)^1 |
||
| Veneers | x | x |
| Inlays | x | x |
| Onlays | x | x |
| Crowns | x | x |
| Copings | x | x |
| Bridge frameworks | x | x |
| Bridges | x | x |
| Full-jaw bridges | x | – |
| Telescopes | x | x |
| Attachments | x | x |
| Abutments, milled from meso blocks | x | x |
| Abutments, milled from disks | x | – |
| Implant bridges | x | – |
| Bars | x | x |
| Splints | x | – |
| Surgical guide (single) |
x | x |
| Surgical guide (mulitple) |
x | – |
| Models | – |
x |
* 80l/min. is recommended
** 30° will be available soon.
*** Coming soon.
**** 30 mm will be available soon.
^1 For processing restorations from an STL/XML import, a limited indication spectrum applies.
The fast 2-in-1 sintering furnace – designed to work optimally with the inLab system.
