Software
Hardware, accessori
Ulteriori documenti
Brochure, linee guida cliniche e studi
CEREC Software
L’installazione del software richiede una licenza di CEREC SW 5.2. Il nuovo firmware CEREC Primescan è incluso in questo download ed è installato.
1 GB
The update CEREC SW 5.2.9 is distributed via AutoUpdate. The update requires a pre-installed CEREC SW 5.2.8.
1 GB
The update CEREC SW 5.2.2 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.2
Connect Software/Connect Case Center Inbox per il laboratorio
Qui puoi scaricare l’attuale Connect Software. Questa versione supporta Primescan AC, CEREC Primescan AC, Omnicam AC e CEREC Omnicam AC (Windows 10). A causa dei diversi tempi di approvazione e registrazione, non tutti i prodotti sono immediatamente disponibili in tutti i Paesi.
Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.
Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.
Connettore DI e CAD/CAM
110 MB
Connect your Connect SW, CEREC SW, inLab CAD SW, inLab CAM SW to DS Core
Software OraCheck
Qui puoi scaricare l’attuale Software OraCheck. Questa versione supporta Primescan AC, CEREC Primescan AC, Omnicam AC e CEREC Omnicam AC (Windows 10). A causa dei diversi tempi di approvazione e registrazione, non tutti i prodotti sono immediatamente disponibili in tutti i Paesi. Non disponibile con Primescan Connect.
Aggiornamento Consulente: Verifica quale aggiornamento delle prestazioni è possibile per Omnicam AC (Windows 7)
Check which Performance Upgrade is possible for your Omnicam AC (Win7).
Software inLab CAM
2 GB
inLab CAM SW 22.2 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
App inLab
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
CEREC Ortho Software
Upgrade description in the following languages: English, German
L’uso di un driver della scheda grafica è necessario per garantire funzionalità ottimali del software. Al primo avvio del software, verificherà automaticamente se il driver è aggiornato. Se ricevi una notifica che non è così, puoi, a questo punto, scaricare il driver adatto al produttore della tua scheda grafica.
Software prepCheck - Per università
907 MB
PrepCheck 5 is compatible with CEREC SW 5.0 / 5.1 and Connect SW 5.0 / 5.1 and the intraoral scanners Primescan and Omnicam. prepCheck 5 runs on the Windows 10 operating system.
Driver delle schede grafiche
Archivio software
Qui puoi scaricare l’attuale Connect Software. Questa versione supporta Primescan AC, CEREC Primescan AC, Omnicam AC e CEREC Omnicam AC (Windows 10). A causa dei diversi tempi di approvazione e registrazione, non tutti i prodotti sono immediatamente disponibili in tutti i Paesi.
1 GB
The update CEREC SW 5.1.3 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.2
952 MB
The update CEREC SW 5.1.1 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.0.
New material with Material Pack CEREC SW 5.1: Activation of CEREC Guide 2 and CEREC Guide 3 for US | Straumann: Variobase C (not for US/not for Japan)
Dentsply Sirona Software Generation 5 runs on Windows 10. In order to benefit from Software Generation 5, a hardware performance upgrade might be necessary for Omnicam users. Please check which Performance Upgrade you need by using our Upgrade Advisor.
Necessary for the installation of CEREC Software 4.6.x and CEREC CAM Software 4.6.x
Preinstalled CEREC SW 4.6.1 with Material Pack required. Bugfix for layered blocks.
The update CEREC SW 4.6.1 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 4.6.x. Not permitted in the US.
Please consider that the CEREC 4.4 is a full version. As CEREC Club Member you will receive this version free-of-charge via your dealer. In case you are not member of the CEREC Club, you can purchase the software via your CEREC dealer.
Please consider that the CEREC 4.3 is a full version. As CEREC Club Member you will receive this version free-of-charge via your dealer. In case you are not member of the CEREC Club, you can purchase the software via your CEREC dealer.
Please consider that the CEREC 4.3 is a full version. As CEREC Club Member you will receive this version free-of-charge via your dealer. In case you are not member of the CEREC Club, you can purchase the software via your CEREC dealer.
Unità di fresaggio e molatura CEREC
Tabelle utensili per CEREC Primemill
Tabelle utensili per il pacchetto CEREC MC XL Premium, CEREC MC XL e CEREC MC X
Tabelle utensili per CEREC MC
CEREC SpeedFire
Implantologia CEREC
Questa panoramica descrive quali combinazioni di basi e materiali in titanio possono essere selezionate nel rispettivo software per ciascun Paese (i dettagli per il Giappone non sono forniti in questo documento). Indipendentemente da ciò, le singole basi e i singoli materiali in titanio potrebbero non essere disponibili.
This overview describes which combinations of titanium bases and materials can be selected in the respective software for each country (the details for Japan are not provided in this document). Irrespective of this, individual titanium bases and materials may not be available.
Dati di calibrazione
I dati sono disponibili solo per gli utenti di Omnicam AC.
Decomprimere il file ZIP scaricato (esempio archive.zip) su un’unità e copiare i due file non compressi (Calibration Data.zip e CalibRegistry.exe) in qualsiasi directory di Omnicam AC, ad esempio: "C:\Sirona" e avviare il file:"CalibRegistry.exe" facendovi doppio clic.
Immettere l’ID del set di calibrazione. Quindi i dati di riferimento della calibrazione per il set di calibrazione sull’AC sono pronti per la calibrazione di Omnicam.
Brochure, linee guida cliniche, studi clinici
Learn more about chairside milling with deep dives into every workflow step including valuable tips and tricks from a clinical expert.
504 KB
CEREC SpeedFire - Dental combination furnace for chairside digital dentistry
504 KB
CEREC SpeedFire - Dental combination furnace for chairside digital dentistry
Enabling your practice to expand into digital dentistry
DS Core Care - Comprehensive service and support to uplift productivity
Grow your pratice by offering sleep appliance treatment with Primescan and Panthera.
Make the best use of your intraoral scanner and visualize volumetric changes in the soft tissue, hard tissue and the position of the teeth over time with OraCheck. Not available with Primescan Connect.
Clinical Studies by features and applications
