Give us a call or provide your contact details below, and a Dentsply Sirona representative will be in touch soon.
DS World 2025 - September 25-27 Registration now OPEN!
2025
DS World
September 25-27, 2025 | MGM Grand
Experience the future of connected dentistry: Each event showcases industry-leading education, cutting-edge advancements, renowned thought-leaders and unrivalled networking opportunities.
Featured
2023 Sustainability Report
Our sustainability strategy is fundamental to our mission and is integral to everything we do.
Switch Country
USA
(English)
Mexico
(Spanish)
Brasil
(Página inicial)
Costa Rica
(Spanish)
Great Britain
(English)
CAD/CAM and CEREC
CEREC Software
Software installation requires a CEREC SW 5.2 license. The new CEREC Primescan firmware is included in this download and is also installed.
4 GB
The installation of the "CEREC SW 5.3.3” update does not require a previously installed version. The automatic update to "CEREC SW 5.3.3" is only offered if a CEREC SW 5.3.x is installed
4 GB
The installation of the "CEREC SW 5.3.2” update does not require a previously installed version. The automatic update to "CEREC SW 5.3.2" is only offered if a CEREC SW 5.3.x is installed
4 GB
Software installation requires a CEREC SW license > 5.0. New firmware versions for CEREC Primemill (3.1.8-V082024) and CEREC SpeedFire are included.
Connect Software/Connect Case Center Inbox for the laboratory
Here you can download the current Connect Software. This version supports Primescan AC, CEREC Primescan AC, Omnicam AC and CEREC Omnicam AC (Windows 10). Due to different approval and registration times, not all products are available in all countries immediately.
Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.
Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.
DI & CAD/CAM Connector
OraCheck Software
Here you can download the current OraCheck Software. This version supports Primescan AC, CEREC Primescan AC, Omnicam AC and CEREC Omnicam AC (Windows 10). Due to different approval and registration times, not all products are immediately available in all countries. Not available with Primescan Connect.
Upgrade Advisor: Check which Performance Upgrade is possible for your Omnicam AC (Win7)
Check which Performance Upgrade is possible for your Omnicam AC (Win7).
inLab CAD CAM Software
inLab Apps
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
CEREC Ortho Software
Upgrade description in the following languages: English, German
The use of a graphic card driver is necessary for ensuring an optimal functionality of your software. At the first startup of your software, it will automatically check whether your driver is up-to-date. Should you receive a notification that this is not the case, you can, at this point, download the driver suitable for your graphic card manufacturer.
prepCheck Software - For Universities
907 MB
PrepCheck 5 is compatible with CEREC SW 5.0 / 5.1 and Connect SW 5.0 / 5.1 and the intraoral scanners Primescan and Omnicam. prepCheck 5 runs on the Windows 10 operating system.
Graphics card drivers
Software Archive
Here you can download the current Connect Software. This version supports Primescan AC, CEREC Primescan AC, Omnicam AC and CEREC Omnicam AC (Windows 10). Due to different approval and registration times, not all products are available in all countries immediately.
1 GB
The update CEREC SW 5.2.11 is distributed via AutoUpdate. The update requires a pre-installed CEREC SW 5.2
4 GB
The update CEREC SW 5.2.10 is distributed via AutoUpdate. The update requires a pre-installed CEREC SW 5.2.9
1 GB
The update CEREC SW 5.2.9 is distributed via AutoUpdate. The update requires a pre-installed CEREC SW 5.2.8.
1 GB
The update CEREC SW 5.2.2 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.2
1 GB
The update CEREC SW 5.1.3 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.2
952 MB
The update CEREC SW 5.1.1 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.0.
New material with Material Pack CEREC SW 5.1: Activation of CEREC Guide 2 and CEREC Guide 3 for US | Straumann: Variobase C (not for US/not for Japan)
Dentsply Sirona Software Generation 5 runs on Windows 10. In order to benefit from Software Generation 5, a hardware performance upgrade might be necessary for Omnicam users. Please check which Performance Upgrade you need by using our Upgrade Advisor.
Necessary for the installation of CEREC Software 4.6.x and CEREC CAM Software 4.6.x
Preinstalled CEREC SW 4.6.1 with Material Pack required. Bugfix for layered blocks.
The update CEREC SW 4.6.1 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 4.6.x. Not permitted in the US.
Please consider that the CEREC 4.4 is a full version. As CEREC Club Member you will receive this version free-of-charge via your dealer. In case you are not member of the CEREC Club, you can purchase the software via your CEREC dealer.
Please consider that the CEREC 4.3 is a full version. As CEREC Club Member you will receive this version free-of-charge via your dealer. In case you are not member of the CEREC Club, you can purchase the software via your CEREC dealer.
Please consider that the CEREC 4.3 is a full version. As CEREC Club Member you will receive this version free-of-charge via your dealer. In case you are not member of the CEREC Club, you can purchase the software via your CEREC dealer.
CEREC Milling and Grinding Units
Tool tables for CEREC Primemill
Tool tables for CEREC MC XL Premium Package, CEREC MC XL and CEREC MC X
Tool tables for CEREC MC
CEREC SpeedFire
CEREC Implantology
This overview describes which combinations of titanium bases and materials can be selected in the respective software for each country (the details for Japan are not provided in this document). Irrespective of this, individual titanium bases and materials may not be available.
This overview describes which combinations of titanium bases and materials can be selected in the respective software for each country (the details for Japan are not provided in this document). Irrespective of this, individual titanium bases and materials may not be available.
Calibration Data
The data is only available to Omnicam AC Users.
Unzip the downloaded zip file (example archive.zip) to a stick and copy the two unzipped files (Calibration Data.zip and CalibRegistry.exe) in any directory of Omnicam AC, e.g.: "C:\Sirona" and start the file:"CalibRegistry.exe" by double-clicking it.
Please enter the ID of your calibration set. Then the calibration reference data for the calibration set on your AC is ready for calibration of your Omnicam.
Brochures, clinical guidelines, clinical studies
CEREC. Now is the time. Digital chairside dentistry. Redefined.
Learn more about chairside milling with deep dives into every workflow step including valuable tips and tricks from a clinical expert.
504 KB
CEREC SpeedFire - Dental combination furnace for chairside digital dentistry
504 KB
CEREC SpeedFire - Dental combination furnace for chairside digital dentistry
Enabling your practice to expand into digital dentistry
DS Core Care - Comprehensive service and support to uplift productivity
Grow your pratice by offering sleep appliance treatment with Primescan and Panthera.
Make the best use of your intraoral scanner and visualize volumetric changes in the soft tissue, hard tissue and the position of the teeth over time with OraCheck. Not available with Primescan Connect.
Digital impression with Primescan: Every day hygiene you can trust
Clinical Studies by features and applications
Patient marketing material
Whitepaper: Data Protection
Contact us
Find out more about our CAD/CAM solutions and our CEREC system from Dentsply Sirona by requesting product information.
USA (English)
Choose your region and language
-
USA (English)
-
-
Mexico (Spanish)
-
Brasil (Página inicial)
-
Costa Rica (Spanish)
-
Great Britain (English)
© 2025 - Dentsply Sirona, All Rights Reserved
